Free Next Day UK Mainland Delivery on all orders.

Ford Focus C-Max 03 > 10 Power Steering Rack

Ford Focus C-Max 03 > 10 Power Steering Rack

1 1
SKU: 1059.1366
Product Specifier: Ford Focus C-Max 03 > 10 Power Steering Rack
Stock:
In stock
Stock:
£159.95 VAT Inc.
£159.95 VAT Inc.
+ £50.00 surcharge
Sale Sold out
Surcharge

As this item has been reconditioned, it carries a 'Surcharge' or 'Refundable Deposit'. This cost is automatically added to your shopping basket along with the item. When we receive your old unit back, the surcharge amount will be refunded to you, as soon as the item has been checked by our returns department. Before returning your old unit, please make sure it is in re-servicable condition. For more information, please visit our 'Tech Centre' page.

View full details

Ford Focus C-Max (Sensor, Rubber Mounts, Visteon) 03 > 10 Power Steering Rack

Lion Automotive Part Number:  1059.1366

Compatible OE Numbers:

  • 3M513A500BM
  • 3M513A500BS

Vehicle Compatibility

Manufacturer Model Engine Size Model Year BHP
Ford Focus C-Max 1.6 10/03 > 03/07 100
Ford Focus C-Max 1.8 10/03 > 03/07 120
Ford Focus C-Max 1.8 09/05 > 03/07 122
Ford Focus C-Max 1.8 04/04 > 03/07 125
Ford Focus C-Max 2.0 03/04 > 03/07 145
Ford Focus C-Max 1.6 TDCi 02/05 > 03/07 90
Ford Focus C-Max 1.6 TDCi 10/03 > 03/07 109
Ford Focus C-Max 1.8 TDCi 01/05 > 03/07 115
Ford Focus C-Max 2.0 TDCi 10/03 > 03/07 133
Ford Focus C-Max 2.0 TDCi 10/03 > 03/07 136

Hydraulic Steering Racks (10)

The main rack shaft in a Hydraulic powered steering rack has a piston attached, and the pinion of a hydraulic steering rack has a control valve built around it. This Hydraulic steering system has been in use for over 40 years and is still in use today.

How it Works

When the pinion valve is turned, it controls the fluid that is supplied by the power steering pump and directs the fluid to the piston attached to the main rack shaft, at this point the fluid forces against the piston to give the steering assistance. A hydraulic steering rack requires feed from either a hydraulic or electric hydraulic power steering pump.

  • Remanufactured to OE standards
  • Complete strip down and rebuild
  • All Gaiters, bearings and seals replaced
  • Pipes inspected and replaced if necessary
  • Rack bars inspected and replaced or reworked if necessary
  • Simulation Bench Tested & Safety Inspected
  • 3-year part only warranty

Warranty Terms and conditions: These are generic for all our products and may not refer to your unit

  1. Damage caused during installation will not be covered.
  2. Installation procedures followed where required. (Installation guides available from our Tech Centre.)
  3. The Hydraulic steering System must have been flushed and cleaned prior to installation (Flushing procedure available in our Tech Centre)
  4. The steering rack must have been installed and mounted correctly. Particulate care with threads when connecting hydraulic pipes.
  5. Only Hydraulic fluid recommended by the Vehicles Manufacturer must be used.
  6. The steering rack must be returned as it was supplied complete and without damage or missing components.
  7. All electronic connectors must have been located correctly. Forced Plugs can damage the pins making the Product Useless.

Despite these conditions we will always work with a customer who has had an installation problem and our Priority is getting you safely and happily back on the road.