Free Next Day UK Mainland Delivery on all orders.

Mazda 2 (TWO) 07 > 15 Manual EPS Rack (1268.1805)

Mazda 2 (TWO) 07 > 15 Manual EPS Rack (1268.1805)

1 1
SKU: 1268.1805
Product Specifier: Mazda 2 (TWO) 07 > 15 Manual EPS Rack
Stock:
In stock
Stock:
£124.95 VAT Inc.
£124.95 VAT Inc.
+ £75.00 surcharge
Sale Sold out
Surcharge

As this item has been reconditioned, it carries a 'Surcharge' or 'Refundable Deposit'. This cost is automatically added to your shopping basket along with the item. When we receive your old unit back, the surcharge amount will be refunded to you, as soon as the item has been checked by our returns department. Before returning your old unit, please make sure it is in re-servicable condition. For more information, please visit our 'Tech Centre' page.

View full details

Mazda 2 (TWO)(Short Tie Arms) 07 > 15 Manual EPS Rack

Lion Automotive Part Number: 1268.1805

Manual (EPS) Steering Racks (12)

The steering rack consists of a main rack shaft and pinion. The pinion shaft is attached to the vehicle steering wheel Via a Universal Joint and column. This type of steering rack is used with the new technologies of electrically powered steering usually via Powered steering column.

How it Works 

The steering rack is completely mechanical in itself. This is controlled and driven by the Electronic motor and torque sensor and ECU of a steering column.

  • Remanufactured to OE standards
  • Complete strip down and Rebuild
  • All Gaiters and bushes replaced
  • Rack bars inspected and replaced or reworked if necessary
  • Bench Tested & Safety Inspected
  • 3-year part only warranty

Warranty Terms and conditions: These are generic for all our products and may not refer to your unit

  1. Damage caused during installation will not be covered.
  2. Installation procedures followed where required. (Installation guides available from our Tech Centre.)
  3. The Hydraulic steering System must have been flushed and cleaned prior to installation (Flushing procedure available in our Tech Centre)
  4. The steering rack must have been installed and mounted correctly. Particulate care with threads when connecting hydraulic pipes.
  5. Only Hydraulic fluid recommended by the Vehicles Manufacturer must be used.
  6. The steering rack must be returned as it was supplied complete and without damage or missing components.
  7. All electronic connectors must have been located correctly. Forced Plugs can damage the pins making the Product Useless.

Despite these conditions we will always work with a customer who has had an installation problem and our Priority is getting you safely and happily back on the road.