Free Next Day UK Mainland Delivery on all orders.

AUDI A6 (4F2,C6)(SENSOR) 04 > 11 STEERING RACK

Audi A6 (4F2,C6)(Sensor) 04 > 11 Steering Rack

Lion Automotive Part Number: 1092.1265 

Vehicle Compatibility

Manufacturer Model Engine Size Model Year BHP
Audi A6 (4F) 2.0 TFSI 06/05 > 03/11 170
Audi A6 (4F)
2.4 05/04 > 10/08 177
Audi A6 (4F)
2.4 Quattro 01/05 > 10/08 177
Audi A6 (4F)
2.8 FSI 10/08 > 03/11 190
Audi A6 (4F)
2.8 FSI Quattro 10/08 > 03/11 190
Audi A6 (4F)
2.8 FSI 11/06 > 10/08 210
Audi A6 (4F)
2.8 FSI Quattro 06/07 > 10/08 210
Audi A6 (4F)
2.8 FSI 10/08 > 03/11 220
Audi A6 (4F)
2.8 FSI Quattro 10/08 > 03/11 220
Audi A6 (4F)
3.0 08/04 > 05/06 218
Audi A6 (4F)
3.0 Quattro 05/04 > 05/06 218
Audi A6 (4F)
3.0 TFSI Quattro 10/08 > 03/11 299
Audi A6 (4F)
3.2 FSI 05/04 > 05/09 255
Audi A6 (4F)
3.2 FSI Quattro 05/04 > 10/08 255
Audi A6 (4F)
2.0 TDI 09/05 > 06/06 121
Audi A6 (4F)
2.0 TDI 07/04 > 03/11 136
Audi A6 (4F)
2.0 TDI 07/04 > 10/08 140
Audi A6 (4F)
2.0 TDI 04/09 > 03/11 163
Audi A6 (4F)
2.0 TDI 11/08 > 03/11 170
Audi A6 (4F)
2.7 TDI 11/04 > 03/11 163
Audi A6 (4F)
2.7 TDI Quattro 06/05 > 03/11 163
Audi A6 (4F)
2.7 TDI 11/04 > 10/08 180
Audi A6 (4F)
2.7 TDI Quattro 11/04 > 10/08 180
Audi A6 (4F)
2.7 TDI 10/08 > 03/11 190
Audi A6 (4F)
2.7 TDI Quattro 10/08 > 03/11 190
Audi A6 (4F)
3.0 TDI Quattro 05/04 > 03/11 211
Audi A6 (4F)
3.0 TDI Quattro 05/04 > 05/06 225
Audi A6 (4F)
3.0 TDI Quattro 06/06 > 10/08 233
Audi A6 (4F)
3.0 TDI Quattro 10/08 > 03/11 240

*This Steering Rack is also compatible with the Estate and Allroad Variants of this vehicle.

Hydraulic Steering Racks (10)

The main rack shaft in a Hydraulic powered steering rack has a piston attached, and the pinion of a hydraulic steering rack has a control valve built around it. This Hydraulic steering system has been in use for over 40 years and is still in use today.

How it Works

When the pinion valve is turned, it controls the fluid that is supplied by the power steering pump and directs the fluid to the piston attached to the main rack shaft, at this point the fluid forces against the piston to give the steering assistance. A hydraulic steering rack requires feed from either a hydraulic or electric hydraulic power steering pump.

  • Remanufactured to OE standards
  • Complete strip down and rebuild
  • All Gaiters, bearings and seals replaced
  • Pipes inspected and replaced if necessary
  • Rack bars inspected and replaced or reworked if necessary
  • Simulation Bench Tested & Safety Inspected
  • 3-year part only warranty

Warranty Terms and conditions: These are generic for all our products and may not refer to your unit

  1. Damage caused during installation will not be covered.
  2. Installation procedures followed where required. (Installation guides available from our Tech Centre.)
  3. The Hydraulic steering System must have been flushed and cleaned prior to installation (Flushing procedure available in our Tech Centre)
  4. The steering rack must have been installed and mounted correctly. Particulate care with threads when connecting hydraulic pipes.
  5. Only Hydraulic fluid recommended by the Vehicles Manufacturer must be used.
  6. The steering rack must be returned as it was supplied complete and without damage or missing components.
  7. All electronic connectors must have been located correctly. Forced Plugs can damage the pins making the Product Useless.

Despite these conditions we will always work with a customer who has had an installation problem and our Priority is getting you safely and happily back on the road.

Free Next Day UK Mainland Delivery on all orders.