Free Next Day UK Mainland Delivery on all orders.

MERCEDES E-CLASS (W210)(SENSOR) 95 > 02 POWER STEERING RACK (1022.1246)

Mercedes E-Class (W210)(Sensor) 95 > 02 Power Steering Rack

Lion Automotive Part Number: 1022.1246

Compatible OE Numbers:

  • A2104602700

Vehicle Compatibility

Manufacturer Model Engine Size Model Year BHP
Mercedes-Benz
E200 2.0 06/95 > 08/00 136
Mercedes-Benz
E200 2.0 Kompressor 08/00 > 03/02 163
Mercedes-Benz
E200 2.0 Kompressor 06/97 > 03/02 186
Mercedes-Benz
E230 2.3 06/95 > 06/97 150
Mercedes-Benz
E240 2.4 06/97 > 08/00 170
Mercedes-Benz
E240 2.6 08/00 > 03/02 170
Mercedes-Benz
E280 2.8 01/96 > 06/97 193
Mercedes-Benz
E280 2.8 12/96 > 03/02 204
Mercedes-Benz
E280 2.8 4-Matic 12/96 > 03/02 204
Mercedes-Benz
E320 3.2 06/95 > 06/97 220
Mercedes-Benz
E320 3.2 06/97 > 03/02 224
Mercedes-Benz
E320 3.2 4-Matic 06/97 > 03/02 224
Mercedes-Benz
E420 4.2 01/96 > 06/97 279
Mercedes-Benz
E430 2.3 06/97 > 03/02 279
Mercedes-Benz
E430 2.3 4-Matic 05/99 > 03/02 279
Mercedes-Benz
E50 AMG 5.0 02/96 > 08/97 347
Mercedes-Benz
E55 AMG 5.4 08/97 > 03/02 354
Mercedes-Benz
E55 AMG 5.4 4-Matic 03/01 > 03/02 354
Mercedes-Benz
E200 2.0 D 01/96 > 03/02 88
Mercedes-Benz
E200 2.2 CDI 06/98 > 03/02 102
Mercedes-Benz
E200 2.2 CDI 07/99 > 03/02 116
Mercedes-Benz
E220 2.2 D 05/96 > 03/02 75
Mercedes-Benz
E220 2.2 D 06/95 > 07/99 95
Mercedes-Benz
E220 2.2 CDI 06/98 > 07/99 125
Mercedes-Benz
E220 2.2 CDI 07/99 > 03/02 136
Mercedes-Benz
E220 2.2 CDI 07/99 > 03/02 143
Mercedes-Benz
E250 2.5 D 06/95 > 07/99 113
Mercedes-Benz
E250 2.5 TD 06/97 > 07/99 150
Mercedes-Benz E270 2.7 CDI 07/99 > 03/02 163
Mercedes-Benz
E270 2.7 CDI 07/99 > 03/02 170
Mercedes-Benz
E290 2.9 TD 03/96 > 07/99 129
Mercedes-Benz
E300 3.0 D 06/95 > 06/97 136
Mercedes-Benz
E300 3.0 TD 12/96 > 07/99 177
Mercedes-Benz
E320 3.2 CDI 07/99 > 03/02 197

Hydraulic Steering Racks (10)

The main rack shaft in a Hydraulic powered steering rack has a piston attached, and the pinion of a hydraulic steering rack has a control valve built around it. This Hydraulic steering system has been in use for over 40 years and is still in use today.

How it Works

When the pinion valve is turned, it controls the fluid that is supplied by the power steering pump and directs the fluid to the piston attached to the main rack shaft, at this point the fluid forces against the piston to give the steering assistance. A hydraulic steering rack requires feed from either a hydraulic or electric hydraulic power steering pump.

  • Remanufactured to OE standards
  • Complete strip down and rebuild
  • All Gaiters, bearings and seals replaced
  • Pipes inspected and replaced if necessary
  • Rack bars inspected and replaced or reworked if necessary
  • Simulation Bench Tested & Safety Inspected
  • 3-year part only warranty

Warranty Terms and conditions: These are generic for all our products and may not refer to your unit

  1. Damage caused during installation will not be covered.
  2. Installation procedures followed where required. (Installation guides available from our Tech Centre.)
  3. The Hydraulic steering System must have been flushed and cleaned prior to installation (Flushing procedure available in our Tech Centre)
  4. The steering rack must have been installed and mounted correctly. Particulate care with threads when connecting hydraulic pipes.
  5. Only Hydraulic fluid recommended by the Vehicles Manufacturer must be used.
  6. The steering rack must be returned as it was supplied complete and without damage or missing components.
  7. All electronic connectors must have been located correctly. Forced Plugs can damage the pins making the Product Useless.

Despite these conditions we will always work with a customer who has had an installation problem and our Priority is getting you safely and happily back on the road.

Free Next Day UK Mainland Delivery on all orders.