Free Next Day UK Mainland Delivery on all orders.

MERCEDES E-CLASS (W211)(SENSOR) 02 > 08 POWER STEERING RACK (1022.0531)

Mercedes E-Class (W211)(Sensor) 02 > 08 Power Steering Rack

Lion Automotive Part Number: 1022.0531

Compatible OE Numbers:

  • A2114602100

Vehicle Compatibility

Manufacturer Model Engine Size Model Year BHP
Mercedes-Benz E200 1.8 Kompressor 11/02 > 12/08 163
Mercedes-Benz
E200 1.8 03/04 > 12/08 163
Mercedes-Benz
E200 1.8 Kompressor 04/06 > 12/08 184
Mercedes-Benz
E240 2.6 03/02 > 12/08 177
Mercedes-Benz
E280 3.0 03/05 > 12/08 231
Mercedes-Benz
E320 3.2 03/02 > 12/08 224
Mercedes-Benz
E350 3.5 03/05 > 12/08 272
Mercedes-Benz
E350 3.5 09/07 > 12/08 292
Mercedes-Benz
E500 5.0 03/02 > 12/08 306
Mercedes-Benz
E500 5.5 04/06 > 12/08 388
Mercedes-Benz
E55 AMG 5.5 Kompressor 10/02 > 12/08 476
Mercedes-Benz
E63 AMG 6.2 03/06 > 12/08 514
Mercedes-Benz
E200 2.1 CDI 07/02 > 12/08 102
Mercedes-Benz
E200 2.1 CDI 07/02 > 12/08 122
Mercedes-Benz
E200 2.1 CDI 04/06 > 12/08 136
Mercedes-Benz
E220 2.1 CDI 03/02 > 12/08 136
Mercedes-Benz
E220 2.1 CDI 03/02 > 12/08 150
Mercedes-Benz
E220 2.1 CDI 04/06 > 12/08 170
Mercedes-Benz
E220 2.1 CDI 03/03 > 12/08 163
Mercedes-Benz
E270 2.7 CDI 03/02 > 12/08 163
Mercedes-Benz
E270 2.7 CDI 03/02 > 12/08 177
Mercedes-Benz
E280 3.2 CDI 05/04 > 12/08 177
Mercedes-Benz
E280 3.0 CDI 03/05 > 12/08 190
Mercedes-Benz
E300 3.0 BlueTec 09/07 > 12/08 211
Mercedes-Benz
E320 3.2 CDI 11/02 > 12/08 204
Mercedes-Benz
E320 3.0 CDI 03/05 > 12/08 224
Mercedes-Benz
E400 4.0 CDI 02/03 > 12/08 260
Mercedes-Benz
E420 4.0 CDI 01/06 > 12/08 314

Hydraulic Steering Racks (10)

The main rack shaft in a Hydraulic powered steering rack has a piston attached, and the pinion of a hydraulic steering rack has a control valve built around it. This Hydraulic steering system has been in use for over 40 years and is still in use today.

How it Works

When the pinion valve is turned, it controls the fluid that is supplied by the power steering pump and directs the fluid to the piston attached to the main rack shaft, at this point the fluid forces against the piston to give the steering assistance. A hydraulic steering rack requires feed from either a hydraulic or electric hydraulic power steering pump.

  • Remanufactured to OE standards
  • Complete strip down and rebuild
  • All Gaiters, bearings and seals replaced
  • Pipes inspected and replaced if necessary
  • Rack bars inspected and replaced or reworked if necessary
  • Simulation Bench Tested & Safety Inspected
  • 3-year part only warranty

Warranty Terms and conditions: These are generic for all our products and may not refer to your unit

  1. Damage caused during installation will not be covered.
  2. Installation procedures followed where required. (Installation guides available from our Tech Centre.)
  3. The Hydraulic steering System must have been flushed and cleaned prior to installation (Flushing procedure available in our Tech Centre)
  4. The steering rack must have been installed and mounted correctly. Particulate care with threads when connecting hydraulic pipes.
  5. Only Hydraulic fluid recommended by the Vehicles Manufacturer must be used.
  6. The steering rack must be returned as it was supplied complete and without damage or missing components.
  7. All electronic connectors must have been located correctly. Forced Plugs can damage the pins making the Product Useless.

Despite these conditions we will always work with a customer who has had an installation problem and our Priority is getting you safely and happily back on the road.

Free Next Day UK Mainland Delivery on all orders.